Federal Hose supplies high-quality heater hose, turbocharger hose, air intake hose, charge air cooler hose, CAC hose, coolant hose and vacuum tubing. We provide solutions cut to length as needed or in reels. Our large inventory allows us to respond quickly to your needs as they develop and grow.
Applications:
Recommend for low pressure handling of higher and lower temperature air, dust or fumes. Ideal for heating applications where minimum weight is required, and where air flow and friction requirements are not severe. Good for heater applications. Not recommended for handling liquid or abrasive materials.
Temperature:
-65°F to +450°F
Abrasion – Interior/Exterior:
Fair/Fair
Flexibility:
Good
Pressure:
Positive/Negative
Standard Length:
12’
Size - ID:
1” to 8” ID
Applications:
Designed for medium pressure handling of air, dust, fumes, and light powders where higher temperature are required. Not recommended for handling liquids or abrasive materials.
Temperature:
-80°F to +600°F
Abrasion – Interior/Exterior:
Fair/Fair
Flexibility:
Good
Pressure:
Positive/Negative
Standard Length:
12’
Size - ID:
1” to 12” ID
Applications:
Standard equipment on trucks, cars and buses. Not recommended for fuel or oil transfer use.
Temperature:
-65°F to +350°F
Abrasion – Interior/Exterior:
Good/Good
Flexibility:
Excellent
Pressure:
Positive
Standard Length:
25’ to 50’ (Heater)
Size - ID:
.250” to 1.25” ID
Applications:
Low pressure coolant and heat connections in hostile engine environments. Resists aging, ozone, chemicals, lubricants, hardening and cracking. Ideal for extreme temperature and various pressure ranges where high performance levels are required.
Temperature:
-65°F to +350°F
Abrasion – Interior/Exterior:
Good/Good
Flexibility:
Excellent
Pressure:
Positive
Standard Length:
3’ to 12’ (Coolant)
Size - ID:
.50” to 6” ID (Coolant)
Applications:
Low pressure coolant and heat connections in hostile engine environments. Resists aging, ozone, chemicals, lubricants, hardening and cracking .Ideal for extreme temperature and various pressure ranges where high performance levels are required.
Temperature:
-65°F to +350°F
Abrasion – Interior/Exterior:
Good/Good
Flexibility:
Excellent
Pressure:
Positive
Standard Length:
3’ to 12’ (Coolant)
Size - ID:
.50” to 6” ID (Coolant)
Applications:
For heavy duty pressure connections in hostile engine environments. Resists hardening, cracking, cold leaks, aging, steam and many chemicals. Ideal for extreme temperature and various pressure ranged where high performance levels are required.
Temperature:
-65°F to +350°F
Abrasion – Interior/Exterior:
Good/Good
Flexibility:
Excellent
Pressure:
Positive
Standard Length:
3’ to 12’ (Coolant)
Size - ID:
.50” to 6” ID (Coolant)
Applications:
Used for vacuum advance, windshield washers, coolant overflow, emission control and other applications. It can be supplied cut to length or in continuous reel format for cutting to fit in the shop.
Temperature:
-65°F to +500°F
Abrasion – Interior/Exterior:
Good/Good
Flexibility:
Excellent
Pressure:
Positive
Standard Length:
25’ to 50’
Size - ID:
.125” to .375” ID
Applications:
Used to make connections to the engine air intake manifold, lubricating oil return path to engine crank case and sump.
Temperature:
Up to +500°F
Abrasion – Interior/Exterior:
Good/Good
Flexibility:
Flexible
Pressure:
Varies depending on size
Standard Length:
3’
Size - ID:
1” to 6” ID
Applications:
The complete sets of ducting which connect the turbocharger outlet to the charge cooler inlet and the charge cooler outlet to the engine manifold.
Temperature:
Up to +500°F
Abrasion – Interior/Exterior:
Good/Good
Standard Length:
Standard Length4” to 8”
Applications:
45° and 90° elbows are designed to meet requirements in various industries. Meets the SAE J20 standards.
Temperature:
Cool side -65°F to +350°F
Hot side -65°F to +500°F
Abrasion – Interior/Exterior:
Good/Good
Standard Length & Size - ID:
Various lengths and diameters to meet a variety of needs